1G2-4 M161 ENGINE INTAKE & EXHAUST
AIR INTAKE SHIELD
Preceding Work : Removal of air cleaner
1 Air Cleaner Assembly
3 Insulator
4 Air Duct Hose
Removal & Installation Procedure
1. Remove the upper cover (3) from the air intake shield (5)
upper mounting pin.
2. Remove the bolts (4 and 6).
3. Remove the air intake shield (5).
4. Installation should follow the removal procedure in the
reverse order.
5 Air Inlet Duct
7 Bolt (M6 × 35 ) ........................................... 9-11 Nm