Daewoo KORANDO Service Manual page 1160

5C-16 CLUTCH
Inspection Procedure
1. Pedal Stroke (A).
Max. Stroke
Notice
To adjust the pedal stroke, loosen the lock nut (H) of the
interlock switch (G) and turn the two lock auto until the stroke
is correct.
2. Pedal Height (B).
Height (From the Floor Carpet)
Notice
To adjust the pedal height, loosen the lock nut (C) of the
stopper bolt (D) and turn the stopper bolt until the height is
correct.
3. Pedal free play (E).
Free Play
Notice
To adjust the pedal free play, loosen the lock nut (F) of the
master cylinder and turn the push rod until the free play is
correct.
4. Check the fulcrum pin and the bushing for wear, the pedal
for bending and the spring for damage.
148 mm
169.5 - 172.5 mm
5 - 15 Nm