Daewoo KORANDO Service Manual page 1063

Notice
Care must be taken when applying sealant to ensure that it is
not applied between the pin and the lever.
5. Assemble the park rod lever, complete with the return spring
and pivot pin, applying a small amount of sealant to the
outer end of the pivot pin.
Notice
That the lever must pivot freely on its pin and the spring
must return the park rod lever to its correct location.
6. Secure the pivot pin with the circlip.
Notice
The pawl must pivot freely on its pin.
7. Install the parking pawl pivot pin and spring.
8. Connect the park rod to the manual valve detent lever.
Ensure the spring and cam collar is firmly installed on the
rod.
AUTOMATIC TRANSMISSION 5A-95