5D2-38 TRANSFER CASE (TOD)
REPLACEMENT OF OIL
Oil Specification
Specification
Specified Oil Level
Oil Replacement
1. Lift on vehicle then make sure on safety.
2. Prepare a vessel to drain transfer case oil.
3. Release filler plug.
4. Drain oil completely.
5. Wash drain plug and than tighten.
Installation Notice
Tightening Torque
6. Replenish standardized oil by specified level through filler
plug hole.
7. Tighten filler plug after washing.
Installation Notice
Tightening Torque
8. Check oil leakage.
Standard
Capacity
Service
19 - 30 Nm
19 - 30 Nm
A.T.F S-3, S-4 or Dexron II, III
Inspection every 15,000km, Replacement every 50,000km
.
1.4 Litre
.