Daewoo KORANDO Service Manual page 1224

5D2-26 TRANSFER CASE (TOD)
Stage
Check output voltage of front and rear speed sensor.
1. Upon driving mode
2. Measure output voltage of front and rear speed sensor
by multi-tester. Check voltage whether it varies within
specified range.
- Specified value
• Front speed sensor
: Pin 11(+), 13(-) in TOD control unit connector
• Rear speed sensor
D4
: Pin 29(+), 13(-) in TOD control unit connector
- Measure value is within specified range ?
Test Stage / Contents
Test Contents and Procedure
Result
Countermeasure
Specified Value
/Yes/No
Yes Check function of
control unit.
It necessary,
replace then delete
fault codes and re-
diagnose .
Perform D5 stage
No