Setting The Print Speed; Turning On The Printer Power Supply; Setting The Print Head Carriage Speed; Setting The Media Feed Speed - GRAPHTEC SignJet JS310-25ES Service Manual

5.6 Setting the Print Speed

5.6.1 Turning on the printer power supply

When the power is turned on, the printer begins a self-test operation (the print head carriage and the feed rollers
move). When the self test has been completed, wait until the main menu is displayed on the LCD.
Since ink has not yet been supplied to the printer, a "No Ink" alarm will sound after several minutes have elapsed.
This alarm does not indicate a malfunction, and no action is required.

5.6.2 Setting the print head carriage speed

(1) From the main menu, select [Print Para] and then press the ENTER key.
(2) From the submenu, select [Print Speed] and then press the ENTER key.
(3) Select "Norm", and then press the ENTER key.
(4) Return to the main menu.

5.6.3 Setting the media feed speed

(1) From the main menu, select [Print Para] and then press the ENTER key.
(2) From the submenu, select [Feed Speed] and then press the ENTER key.
(3) Select "Norm", and then press the ENTER key.
(4) Return to the main menu.
JS310-UM-251-9370
5. Assembling the Printer and the Installation Procedure
34