Table of Contents
Advertisement
4.3.3 System warning and error display
1. Warning:
Warn1: UV lamp is NOT ready;
Warn2: Press pole is NOT pulled down;
Warn3: The system is executing ink refilling;
2 Error:
When one of the errors listed below occurs during printing, the printer will run normally but give alarm
for warning.
Err5:
Ink refill overtime;
Err6:
The safety bottle is full;
Err7:
For solvent based printer: The waste ink bottle is full;
For UV printer: The safety bottle in manometer is full;
Err8:
Null
Errors listed below indicate the detail for further check when self test fails
Err9:
Y raster count direction differs from motion direction;
Err10:
Y raster signal is NOT detected;
Err11:
Y raster error too big;
Err12:
Reverse count abnormal;
Err13:
Self test for main board failed;
Err14:
Version of assistant board NOT matches main board;
JS310-UM-251-9370
22
4. Basic Panel Operation
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SignJet JS310-25ES and is the answer not in the manual?
Questions and answers