Assembling The Printer And The Installation Procedure; Notes On The Installation Environment; Installation Space - GRAPHTEC SignJet JS310-25ES Service Manual

5. Assembling the Printer and the Installation Procedure

5.1 Notes on the Installation Environment

5.1.1 Installation Space

Sufficient space must be left in front of, behind, and at both sides of the printer not only for normal operating
procedures such as the replacement of consumable, the handling of printed materials, and for ventilation, but also
for the replacement of parts in the event of a malfunction. Ensure that the space left around the printer is as shown in
the following diagram.
CAUTION:
Do not install the printer in an unsteady location such as on a rickety base or on a sloping surface.
There is a risk of injury if the printer falls or topples over.

5.1.2 Installation Space

Use the printer in the following temperature and humidity ranges.
Temperature: 20 to 28˚C
Humidity: 40 to 70% (non-condensing)
CAUTION:
If the printer is used outside the specified temperature and humidity ranges, the print quality may be
adversely affected and the printer may malfunction.
JS310-UM-251-9370
5. Assembling the Printer and the Installation Procedure
25