Safety Information; Safety Precautions - GRAPHTEC SignJet JS310-25ES Service Manual

1. Safety information

Before use your Inkjet Digital Printer, please read following safety information carefully and pay more
attention to the cautions on the Printer.

1.1 Safety precautions

• Install over-current and over-voltage facility for printer power.
Failure to follow this guide could result in electric shock, personnel injury and fire.
• Clean the ink channels with solution matching to the used ink.
Failure to follow this guide could result in filter clog and ink channel blockage.
• Besides the ground-line for power, another unattached ground-line should be connected outdoor.
Failure to follow this guide could result in abnormal work status of printer.
• Static prevent facility should be settled on the carpet or in dry climate.
Failure to follow this guide could result in print head or other parts damage on the printer.
• Waiting for 10 minutes at least after power off to transport, connect and check the printer.
Failure to follow this guide could result in electric shock.
• Printer should be settled on flat floor and be adjusted horizontally.
Failure to follow this guide could reduce the print resolution.
• Clean the print head and ink channel with solution after long-time printing.
Failure to follow this guide could result in print head damage and ink channel clog.
• Never put hands on depend fence while the printer is working.
Failure to follow this guide could result in hand crushing.
• Never put hands into the heating board while the board is heating.
Failure to follow this guide could result in hand scald.
• Never put hands on rotating rollers while the printer is working.
Failure to follow this guide could result in hand crushing.
• Don't open the electric tank in normal condition.
Failure to follow this guide could result in electric shock.
JS310-UM-251-9370 1
1. Safety information