Launching The Try Utility - GRAPHTEC SignJet JS310-25ES Service Manual

8.4 Launching the Try Utility

(1) Turn on the printer power supply.
CAUTION:
Remove the wet keeping frame, before turn on the power supply.
(2) Launch the Try program.
Select [Try] from [Programs] in the [Start] menu.
(3) The following screens are displayed.
(4) Specify the printer you will use.
When using this software for the first time, a printer must be selected.
Select "JS310-xxES" from "Printer" on the menu bar.
JS310-UM-251-9370
8. Print Head Adjustment Procedures
73