GRAPHTEC SignJet JS310-25ES Service Manual page 36

CAUTION:
The printer weighs approximately 270 kg (JS310-18ES) or 330 kg (JS310-25ES). There is a risk of lower
back injury to the person(s) attempting to lift the printer. Use a forklift to move the printer.
CAUTION:
When raising the printer off the base used to hold it in place, make sure that the printer's weight is
evenly balanced.
(5) Move the printer.
Unlock the casters, and then move the printer to its installation location.
If the installation location is on a different level or if there is a steep slope leading up to it, use a forklift or
crane to move the printer.
CAUTION:
The printer weighs approximately 270 kg (JS310-18ES) or 330 kg (JS310-25ES). There is a risk of lower
back injury to the person(s) attempting to lift the printer. Use a forklift or crane to move the printer if
the installation location is on a different level or if there is a steep slope leading up to it.
(6) Lock the casters.
JS310-UM-251-9370
5. Assembling the Printer and the Installation Procedure
Align the direction of the wheels with the
rectangular holes before raising the printer.
Lock the casters
29