GRAPHTEC SignJet JS310-25ES Service Manual page 35

(3) Remove the printer fastenings.
(4) Move the printer off the base used to hold it in place.
Use a forklift to raise the printer off the base.
CAUTION:
Before raising the printer, align the direction of the wheels with the direction of the rectangular holes.
If they are not aligned, the wheels will catch on the edges of the holes when the printer is raised.
JS310-UM-251-9370
5. Assembling the Printer and the Installation Procedure
Printer fastenings (8 locations)
Insert the forklift prongs here.
28