Table of Contents
Advertisement
Data Menu
Conversion Formats
On the Conversion formats dialog box displays (Figure 3-28), do the
following to create, edit, or delete a conversion format:
• New – on the conversion formats dialog box (Figure 3-28), press
to enter a conversion format. The Format name dialog box
displays (Figure 3-28).
– Format name: enter the name of the conversion format.
– Extension (e.g.,TXT): enter an extension type. Only enter
generic ASCII formats; such as, .txt, .asc, .csv, etc.
Figure 3-28. Conversion Formats/Format Name Dialog Boxes
• Edit – on the Conversion formats dialog box, press Edit to
change the selected format. See the "New" bullet above for
details on the dialog box that displays.
• Delete – on the Conversion formats dialog box, press Delete to
remove the selected format.
The Line Items
deletes line items for the selected conversion format (Figure 3-30 on
page 3-19).
• Add – on the Line items tab, press Add to add a line item and it's
respective information (Figure 3-29 on page 3-19), then press Ok
to save the information. Repeat this process for each line item.
– Type: select either Point name, Point description, Point
northing, Point easting, Point elevation, Point layer name,
3-18
tab on the Format name dialog box adds, edits, or
Pocket-3D Reference Guide
Advertisement
Table of Contents
