Road Surface File - Topcon Pocket-3D Reference Manual

Data Menu
• Ok – press to set the new surface as the current surface 
(Figure 3-41).
• Edit – press to edit the selected file, i.e., TIN, Road, Plane, or
Bestfit plane surface.
Figure 3-42. New Surface Filename Dialog Box
• Delete – press to remove an existing file from the internal
memory.
Select a file to remove, then press Delete.
The program always reminds the operator to confirm deletion of a
selected file. Press Yes to confirm the deletion.

Road Surface File

This surface type creates a new road surface with known horizontal,
vertical, and template design information.
3-28
Figure 3-41. TIN Surface Parameters
Pocket-3D Reference Guide