Table of Contents
Advertisement
Setup Menu
7. On the Equipment configuration dialog box, highlight the new
or edited configuration file, and press Ok to return to the Main
Screen (Figure 2-22).
Figure 2-22. Select Equipment Configuration
GPS Augmented Sensor Type
(Augmented) sensor type, which allows you to run without RTK
corrections (or without RTK options in your receiver) and to perform
rough grade-checking and stakeout using GPS positions computed
with the help of the WAAS (North America) or EGNOS (Europe)
GPS augmentation system. The expected position accuracies can
range from anywhere between 0.5' and 4.0' (0.2m and 1.5m)
depending on satellite availability.
Sample Configuration: GPS Augmented Sensor Type
following procedure is an example of selecting GPS (Augmented) as
the sensor type for GPS.
1. Follow steps 1 & 2 above, then on the Configuration name
dialog box, select GPS (Augmented) as the sensor type, and press
Next.
2. On the Dimensions tab (Figure 2-23 on page 2-17), select the
antenna type, enter antenna height, measure to either the Base or
the Rim, and select the appropriate connection for Pocket-3D.
The corresponding Image tab illustrates the setup.
2-16
Now you can select a GPS
Pocket-3D Reference Guide
The
Advertisement
Table of Contents
