Current File Or <None - Topcon Pocket-3D Reference Manual

Surface File" on page 3-28 for more details.
• Plane Surface Model – defined with a continuous compound
plane in two directions (mainfall and crossfall). See "Plane
Surface File" on page 3-39 for more details.
• Best-fit Model – a dual-slope plane created to balance the cut/fill
values across the entire area of interest. See "Best-fit Plane
Surface File" on page 3-40 for more details.
Current File or <none>
Highlights the currently loaded Surface file or if no file has been
selected, <none> is highlighted.
1. To access available Surface files, or to create a new Surface file,
tap DataSurface[current file] (Figure 3-37).
2. The Surface(s) dialog box displays all surfaces available. To set a
Surface file, select it from the list and press Ok (Figure 3-38 on
page 3-26). At the verification screen, press Ok to use this
Surface file as the current design surface. Surface Files can be
created, exported, imported, or deleted.
P/N 7010-0628
Filename selected
Figure 3-37. Data Surface None
Surface
No Filename Selected
3-25