Table of Contents
Advertisement
Other – Pocket-3D 9.2 now handles significantly larger project
files (up to 10 times larger than before). Also, on-screen panning/
zooming selection with large data files is greatly improved.
The following list briefly describes the features and functions for
version 9.1 of Pocket-3D:
TP3 Project Files:
• All project/design data is now contained within a single
Topcon TP3 file, via 3D-Office, which is the standard project
configuration for all 9.1 series releases.
• Existing TIN/Road/Linework/Point/Control files can be
imported/exported for TP3 files.
• A brief summary of the TP3 project file contents can be
viewed from the Project file(s) listing ("Info").
MX3 Machine Files – all machine configurations are now
stored with MX3 file extensions and are in human-readable XML
format. Older (*.MB3) machine configurations are not supported.
Authorization Codes – the password protection
mechanism has been changed to allow a larger number of options
and to provide a better security. Because the new codes are much
longer, you now have the ability to import them directly from an
option file on a USB dongle, etc. Existing installs of Pocket-3D
will automatically be upgraded to the new protection mechanism
See "Starting Pocket-3D" on page 1-5 for more information.
Grade Indicator – A grade-indicator bar, similar to
3DMC, can be displayed when doing a surface check. In
Surface Check mode the user can now select to see a tri-color
grade-indicator similar to the one seen in the 3DMC software
that gives real-time cut/fill updates to the design surface. The
grade-indicator option is located in the display menu and
only shows up when there is an active surface or alignment.
To adjust the grade indicator settings, press and hold on the
grade-indicator strip to access a sub-menu containing options
for tolerances and range.
P/N 7010-0628
What's New with Pocket-3D
xi
Advertisement
Table of Contents
