Control Point - Topcon Pocket-3D Reference Manual

Control Point

To measure a point that can be used as a mmGPS transmitter location
point, tap SurveyMeasure ptsControl pt (Figure 4-8).
NOTICE
On the control pt dialog box (Figure 4-9 on page 4-6), enter the
following information, then press start to measure Coords/GPS
coordinates.
• Name – enter a name for the control point.
• Description – enter the point description (if preferred).
P/N 7010-0628
The measure control points option is used to add
mmGPS transmitter location points. Do not use for
extending localization.
Figure 4-8. Measure a Control Point
Measure Points
4-5