Table of Contents
Advertisement
Modify
On the Options dialog box (Figure 5-17), press Modify to change/
edit registered user and authorized options. The Pocket3D dialog
(Figure 5-18 on page 5-14) box displays. After entering the following
information on the Pocket3D dialog box, press Ok.
NOTE
• Device ID – the device identification to give to a Topcon
representative to obtain new authorization codes for the desired
applications.
• User name – enter the name in which the software is registered.
• Authorization code – enter the codes for the purchased options.
• From File – press to copy authorization codes directly onto the
GX-60 via the USB port.
Existing installs of Pocket-3D will automatically be upgraded to
the new protection mechanism.
P/N 7010-0628
Figure 5-17. Pocket-3D Options (Example)
To activate new/changed codes and options, turn
Pocket-3D off, then on.
About Pocket-3D
5-13
Advertisement
Table of Contents
