Topcon Pocket-3D Reference Manual page 222

Data Menu
– Move P1 to P2: P1 is the "From" location and P2 is the "To"
location.
Pocket-3D calculates the dN and dE values automatically.
NOTE: Alternatively, you can manually enter a direction value
for Delta North (dN/Delta East (dE), if you know by how much
you want to move/align your objects with to the north/east.
– dN/dE: enter delta North (dN) and delta East (dE) values
manually if you know by how much you want to move your
objects to the north/east.
– Align/with: to rotate your objects as well, you can choose to
calculate a rotation angle by how much those objects will be
rotated. Use P3 as the "From" and P4 as the "To" for
calculation.
– Move: check mark this box to move and rotate a copy of the
current selected items, even save it to another layer.
Figure 3-172. Move Selected Objects Dialog Box
The view screen (Figure 3-173 on page 3-113) shows the current
location in green and the new location in red after the move.
1. Press the +/- (Plus/Minus) buttons to zoom in or out on the
image, or press down on the screen and drag the image around.
2. Press Next to save and return to the main screen.
3-112
Pocket-3D Reference Guide