Topcon Pocket-3D Reference Manual page 163

• Insert – on the Vertical profile dialog box (Figure 3-74 on
page 3-52), press Insert to add an element above the selected
element. All following elements will be shifted by the length of
the inserted element. See the "Add" bullet on page 3-52 for
details on inserting an element.
• Edit – on the Vertical profile dialog box (Figure 3-74 on 
page 3-52), press Edit to edit the selected element. See the "Add"
bullet page 3-52 and Figure 3-74 on page 3-52 for details on
editing the element.
• Delete – on the Vertical Profile dialog box (Figure 3-75 on
page 3-53), press Delete to remove the selected element.
The Template definitions
creates (adds), edits, or deletes templates. After creating templates,
press Next to display the Template applications dialog box 
(Figure 3-78 on page 3-55).
• Add – on the Template definitions dialog box, press Add to enter
a template and its respective information, then press Ok to save
the information. Follow the same process as shown on page 3-33.
• Edit – on the Template definitions dialog box, press Edit to edit
the selected template. Follow the same process as seen on 
page 3-33.
P/N 7010-0628
Figure 3-75. Vertical Profile Parameters
dialog box (Figure 3-76 on page 3-54)
Alignment
3-53