Table of Contents
Advertisement
Setup Menu
On the antenna information dialog box, enter the following
information using the same units of measure entered in the previous
step and press Next. These settings have a corresponding Image tab to
illustrate the setup.
For range poles,
(Figure 2-5):
• Antenna type – select the type of antenna.
• Antenna height – enter the antenna height of the GPS+ antenna
from antenna measurement point to pole tip.
• Measured to – enter where on the GPS+ antenna the antenna
height was measured.
• Connection (Pocket-3D) – select the communication port used
between controller and instrument.
Figure 2-5. Range Pole Antenna Setup Information
2-4
Figure 2-4. Configuration Name/Type
enter the following antenna information
Pocket-3D Reference Guide
Advertisement
Table of Contents
