Compare Surface - Topcon Pocket-3D Reference Manual

Data Menu
• Set as a current surface – enable to set the surface as the current
surface.
Figure 3-60. Best-fit Plane Surface Parameters

Compare Surface

This menu selection calculates the difference in volume between any
two overlapping surfaces. Use the Calculation type to create an exist-
ing surface in the field (see "Calculation Wizard" on page 3-84 for
more details). This surface can then be used to compare with a pro-
posed design surface or a different existing surface, calculating a vol-
ume between the two surfaces.
To compare two existing surfaces, tap DataSurfaceCompare
surface (Figure 3-61 on page 3-42).
Figure 3-61. DataSurfaceCompare Surface
3-42
Pocket-3D Reference Guide