Table of Contents
Advertisement
On the point properties
ing parameters for the point, then press Finish.
• Pt. number – enter the point number.
• Pt. descriptor – select a point descriptor from the drop-down box.
• Add to layer – choose the layer from the list in which you want to
store the point.
Convert Polyline to Alignment
On the Calculation type dialog box (Figure 3-160), select Convert
polyline to alignment, then press Next.
Figure 3-160. Calculation Type – Convert Polylines to Alignment
This process creates an RD3 file from a polyline selected on the main
screen.
P/N 7010-0628
dialog box (Figure 3-159), enter the follow-
Figure 3-159. Point Properties
Calculation Wizard
3-105
Advertisement
Table of Contents
