Edit; Delete; Import/Export; From Rd3 File - Topcon Pocket-3D Reference Manual

Data Menu

Edit

To edit an alignment file, select the desired file, then press Edit. Fol-
low the same process as for a new alignment file (see "New" on
page 3-49).

Delete

The Delete button removes an existing file from internal memory. The
touch screen lists all files available for deletion.
To remove a file, select the desired file, then press Delete.
The program always confirms the deletion of a selected file. Select
Yes to confirm the deletion.

Import/Export

To import an alignment file, tap DataAlignmentImport/Export
(Figure 3-80).
Figure 3-80. Import/Export an Alignment File

From RD3 File

To import a Topcon Road file (RD3) as an alignment file, tap
DataAlignmentImport/ExportFrom RD3 file (Figure 3-81
on page 3-57).
Pocket-3D Reference Guide
3-56