Polyline - Topcon Pocket-3D Reference Manual

Polyline

To measure points at a set distance along a polyline, tap Survey
Auto-topoPolyline (Figure 4-32).
On the Polyline dialog box, select the desired parameters, then press
Ok (Figure 4-33).
• Min. distance – enter the minimum distance for logging points.
• Add to layer – stores measured points to the selected layer.
P/N 7010-0628
Figure 4-32. SurveyAuto-topoPolyline
Figure 4-33. Polyline Dialog Box
Auto-topo/Stop Auto-topo
4-21