Topcon Pocket-3D Reference Manual page 276

Survey Menu
• Cut: to slope start – displays the cut value from the top of the
second stake to the intersecting mark on the first stake.
Figure 4-74. Measure Stake 1 and Image Results Screen
Measure Stake 2
The Measure stake 2 menu is available during side slope or cross
section slope stakeouts only. To view Measure Stake 2 parameters,
press the 2.Stake button on the results screen of Measure Stake 1
(Figure 4-74 on page 4-50).
Tap SurveyStake-outMeasure stake 2 (Figure 4-75) to
measure the parameters of Measure Stake 2.
Figure 4-75. Measure Stake 2 on the Slope
The Measuring dialog box displays, followed by the results screen
(Figure 4-76 on page 4-51). The corresponding Image tab illustrates
the measurements described on the 2.Stake tab.
The 2.Stake tab displays the results of the second point (Measure
Stake 2) staked out on the side slope.
Pocket-3D Reference Guide
4-50