Topcon Pocket-3D Reference Manual page 183

On the points parameters dialog box (Figure 3-109 on page 3-74)
enter or select the following parameters:
• Add – on the points listing dialog box (Figure 3-108), press to
enter a point and its respective information, then press Ok to save
the information (Figure 3-109 on page 3-74) and return to the
points listing dialog box (Figure 3-108).
– Pt. number: enter the point number.
– Description: select a point description from the drop-down
box (if preferred)
– Layer: select a layer in which to store the point.
– North/East/Elev: in each entry box, enter the coordinates for
Northing/X (North), Easting/Y (East), and Elevation/Z (Elev).
• Edit – on the points listing dialog box (Figure 3-108, press to edit
the selected point. See the "Add" bullet above and Figure 3-109
on page 3-74 for details.
• Delete – on the points listing dialog box (Figure 3-108 on
page 3-73) press to remove the selected point.
P/N 7010-0628
Figure 3-108. Points Listing Dialog Box
Points
3-73