Alignment - Topcon Pocket-3D Reference Manual

– Display grid-lines: enable to display the grid-lines at a set
interval on the surface.
– Grid interval: enter the grid interval for the mainfall.
– Grid interval (crossfall): enter the grid interval for the
crossfall.
– Orientation: enter the desired orientation for the mainfall.

Alignment

Used in 3D GPS+, Total Station, and Robotic applications to create,
edit, and select Alignment files. For Road Surface models, alignment
options dialog box displays or hides features lines, transition points,
station lines. and station points; changes the color for feature lines,
center lines and station lines; and sets the interval for station lines and
station points. Alignment files can also be copied between the Pocket-
3D controller and the Control Box using a Flash Card.
Alignment files contain the following three elements:
• Horizontal alignments – layout and direction of the road (or X
and Y information).
• Vertical profiles – elevations (or Z) for the selected horizontal
alignment.
• Cross-section templates – details of the road design.
P/N 7010-0628
Figure 3-68. Options Dialog Boxes
Alignment
3-47