Inverse Between Two Points - Topcon Pocket-3D Reference Manual

Inverse Between Two Points

On the Calculation type dialog box, select Inverse between two pts to
calculate the inverse of the direction and distance between two points,
then press Next (Figure 3-126).
Figure 3-126. Calculation Type – Inverse Between Two Points
The results dialog box (Figure 3-127 on page 3-86) displays the dis-
tance between selected points and the following calculation: Horizon-
tal Distance (Horiz. dist.), Slope Distance (Slope dist.), Azimuth,
Gradient, Delta X, Delta Y, and Delta Z.
• From Point – press to select the beginning point on the From/To
points selection dialog box.
• To Point – press to select the end point on the From/To points
selection dialog box.
• Inverse arrows
between the selected points.
• Press Back to return to the Calculation type dialog box
(Figure 3-126) or Cancel to return to the main view screen.
P/N 7010-0628
– press to calculate the return (inverse)
Calculation Wizard
3-85