Topcon Pocket-3D Reference Manual page 273

– Description: enter the point description (if preferred).
• Layer – tap select a new layer to the Point file from the drop-
down entry-box. After entering the layer's parameters, press Ok
to save the information.
• North – see (Table 4-1) for more information.
• East – see (Table 4-1) for more information.
• Elev – see (Table 4-1) for more information.
Stake-out Previous Point
To activate the Stake-out previous point menu (Figure 4-71 on
page 4-48), first stake out a point.
To stake out the previous point, tap SurveyStake-outStake-out
previous point. This menu option is only available for point list and
control point stake-outs.
P/N 7010-0628
Figure 4-70. Point and Alignment Screens
Stake-out
4-47