Survey Menu
• Pt. descriptor – enter the point description (if preferred).
• Press Start to begin the auto-topo survey.
By Time
To measure points at a constant time interval, tap SurveyAuto-
topoBy time (Figure 4-28).
On the by time dialog box, select the desired parameters, then press
Ok (Figure 4-29).
• Time interval (secs) – enter the time interval for logging points.
• Add to layer – stores measured points to the selected layer.
• Assign pt. numbers – enable to assign point numbers to measured
points.
4-18
Figure 4-27. Auto-topo Survey – By Distance
Figure 4-28. SurveyAuto-topoBy time
Pocket-3D Reference Guide