Table of Contents
Advertisement
Setup Menu
• Backsight azimuth – enter the desired azimuth for the
backsight.
3. Press Ok to continue (Figure 2-54).
Sight
Backsight
4. Press Next to display the sight backsight dialog box
(Figure 2-54).
Setup method dialog box
Figure 2-55. Known Station and Azimuth Setup Method
New station by resection
take a measurement to each point.
1. On the Setup method dialog box (Figure 2-56 on page 2-41),
enter instrument height and unit of measurement as described
above, (page 2-38) then press Next.
The control points dialog box displays (Figure 2-56 on
page 2-41).
2-40
Figure 2-54. Sight Backsight Dialog Box
add a control point to the resection and
Backsight Setup Dialog Box
Pocket-3D Reference Guide
Advertisement
Table of Contents
