Range-Pole - Topcon Pocket-3D Reference Manual

Figure 2-42. Select Total Station Connection Type
NOTE
A confirmation box displays to save the machine configuration file.
Press Finish (Figure 2-43).

Range-pole

To set up the range pole, tap SetupRange-pole (Figure 2-44 on
page 2-32).
On the range pole setup dialog box (Figure 2-44 on page 2-32), select
or enter the following parameters and press Ok.
P/N 7010-0628
The Advanced dialog box is only available when a
Prism sensor is selected.
Figure 2-43. Save the Configuration
Total Station Applications
2-31