Table of Contents
Advertisement
• Station – shows the station number for Measure Stake 2.
• 1. Offset – displays the horizontal distance from the centerline.
• 2. Elev – displays the elevation at the top of the second stake.
– Delta North: shows north information during a measurement/
stake-out.
– Delta East: shows east information during a measurement/
stake-out.
• Cut/Fill – displays the distance from the top of the second stake to
the intersecting point along the stake. This will always be a cut
value if done correctly.
• Cut: to slope start – displays the cut value from the top of the
second stake to the bottom of the slope.
• Cut: design at 1st stake – displays the cut value from the top of
the second stake to the intersecting mark on the first stake.
The 2.Stake tab shows the same parameters as 1.Stake tab described
under "Measure Stake 1" on page 4-49.
Figure 4-76. Results Screen for Measure Stake 2
The section view on the main screen displays station number, vertical
location, and horizontal location of the staked out point on the slope
(Figure 4-77 on page 4-52).
P/N 7010-0628
Stake-out
4-51
Advertisement
Table of Contents
