Project - Topcon Pocket-3D Reference Manual

Data Menu

Project

In GPS control applications, the project engineer provides a design
surface file for the jobsite. The correct file must be copied into the
GX-60 control box and selected as the project for the jobsite.
To access available Project files or to create a new Project file, tap
Data MenuProject<none> (Figure 3-2).
Figure 3-2. Data Project Menu [File
To change the Project file, highlight a file from the list and press Ok
(Figure 3-3 on page 3-2). At the verification screen, press Yes to use
this Project file for the current project. Project files can be created,
copies, or deleted. GPS localization files can also be viewed and
saved.
Figure 3-3. Copy a Project File
Pocket-3D Reference Guide
3-2