Clean The Rail And Bearings; Pinch Rollers - Oce CS7075 User Manual

Clean the Rail and
Bearings

Pinch Rollers

5-4
Pinch rollers
Rail
Fig. 5-1. Location of rollers, bearings, and rail
The carriage rail carries the printhead carriage across the width
of the platen. As dust and ink accumulates on the rail, the mate-
rial could accumulate on the carriage bearings (wheels) and
cause banding in printed output or noisy ("click-click-click")
carriage motion.
1. Wipe the pinch rollers with a lint-free cloth. To remove ink,
wipe with a minimal amount of isopropyl alcohol, and dry
thoroughly befoer printing again.
Caution
DO NOT ALLOW ISOPROPYL ALCOHOL TO TOUCH
THE PRINTHEADS, especially the inkjet orifice plates.
Contact with the ink could cause the ink to coagu-
late, rendering the printhead unusable and requiring
it to be replaced. Be sure that cleaned surfaces have
dried before printing.
Bearings (back of carriage)

Clean the Rail and Bearings