Oce CS7075 User Manual page 33

Parts Overview
Index Description
12 UV parking station — shields the operator from excess
exposure to UV light. It must be installed during print-
ing, but may be removed to access the printheads for
cleaning.
13 Stand — supports the printer.
14 Casters (four places) — enables easy relocation of the
printer, can be locked in place.
15 Leveling pads (four places) — allows the printer to be
stabilized and leveled for consistent media feeding.
16 Docking station — holds the profilers, one for each
box, that track ink and printhead flush usage, and iden-
tify ink characteristics for the RIP.
17 Ready-for-Refill LEDs — an LED illuminates when its
corresponding profiler indicates that the ink box
should be replaced with a full one.
18 Off-Head System (OHS) — electronics, vacuum (to
maintain negative head pressure), and pressure (for
purging the printheads) that provide ink and printhead
flush for cleaning the printheads.
19 Ink boxes — each box holds ink or printhead flush.
Flexible tubing connects to each box to deliver the con-
tents to the printheads.
20 Standby power switch — places printer in standby
mode (to disconnect from power, disconnect power
cord).
21 UV lamp power supply — provides the UV lamps with
power.
22 Vacuum/Pressure (VP) assembly — provides vacuum
and pressure to the OHS and printheads.
23 Media advance switch — a rocker switch that advances
the media forward or back.
24 Auxiliary 24 volt power jack to VP system — accepts
the supplied 24 volt DC power supply to the VP system,
which can be connected to a user-supplied UPS for
temporary battery backup power or a wall outlet for
temporary power during maintenance that requires the
rest of the printer to be powered down. See Appendix
A, Technical Specifications, for details.
1-21