Uv Lamp Operation And Maintenance - Oce CS7075 User Manual

UV Lamp Operation
and Maintenance
5-18
For an overview of the UV lamp system, see "UV Lamp Over-
view" on page 3-3.
This section covers the following topics:
◆ Operating Tips (page 5-19)
◆ Replacing UV Lamp Bulbs (page 5-20)
◆ Balancing Lamp Hours (page 5-20)
WARNING UV light hazard. Excess exposure to high-intensity UV
light can result in photokeratitis (also known as snow
blindness or welder's flash). AVOID LOOKING
DIRECTLY AT THE UV LIGHT.
VORSICHT UV Licht hoher Intensität. Bitte vermeiden Sie es,
direkt in die Lampen zu schauen.
Caution
Failure to allow the lamps to cool down properly will
damage the lamps. If you disconnect the power
cable from the back of the printer or disconnect the
green power cable from the lamp assembly before
the cool down sequence has finished, you will dam-
age the lamps.

UV Lamp Operation and Maintenance