Menu; Calibrate Printer - Oce CS7075 User Manual

Menu

Calibrate Printer

2-10
The menu has these main sections:
◆ Calibrate Printer (see below)
◆ Printer Settings (page 2-1 1)
◆ Maintenance (page 2-15)
◆ Service Printer (page 2-16)
◆ User Diagnostics (page 2-16)
◆ Warnings & Actions (page 2-16), shown in Expert Messages
Mode only
◆ Print Menu Tree (page 2-16)
This section explains each of the functions on the printer menu.
See "Menu Tree" on page 2-17 for a listing of all menu options.
For instructions on using these options, see Chapter 4, Calibrat-
ing the Printer.
◆ Auto Calibrations — see "Auto Calibrations" on page 4-6 for
instructions.
◆ Auto Bidi Calibration — ensures that every working jet
fires a pixel at precisely the same location, in both direc-
tions of travel
◆ Auto H2H Calibration — aligns the printheads relative to
each other
◆ AutoJet Calibration — locates and substitutes missing jets
for working jets
◆ Full AutoSet — runs AutoJet, AutoBiDi, and AutoH2H in
sequence
Menu