Loading Ink; When To Load Ink; Unloading An Empty Ink Box; Loading A Full Ink Box - Oce CS7075 User Manual

Loading Ink

When to Load Ink

Unloading an Empty Ink

Loading a Full Ink Box

Loading Ink
The amount of ink in the ink box is tracked by the printer soft-
ware and recorded on its corresponding profiler. When the ink
box is almost empty, the LED above the corresponding profiler
will blink. You should replace the ink box with a full ink box of
the same color ink as soon as possible. The status of each ink
box and profiler is indicated by the LEDs as follows:
◆ Off — OK
◆ Slow Blink — profiler is being verified after insertion
◆ Fast Blink — low ink warning (300 ml remaining, amount
can be changed by the user)
◆ On — ink system action (ink empty, ink pump failure, pro-
filer error, or other), see control panel
1. Remove the profiler.
Box
2. Lift the box out of its holder and turn the box upside down so
the ink tube is pointing up.
3. Push the button at the end of the ink tube connector and dis-
engage the tube from the ink box.
4. Remove and dispose of the ink box (refer to the MSDS for
proper disposal procedures).
1. Open the new ink box and locate the supply connector.
Fig. 3-1. Ink box with supply connector
3-11