Table of Contents
Advertisement
Loading Roll-Fed Media
◆ If you press , the control panel displays a numeric key-
pad:
Fig. 3-8. Numeric entry screen
15. Enter the length of the media roll (if it is a new roll) or the
length remaining (if it is a partially used roll), and press the
Enter key to continue.
To skip this step, press Esc without entering a value.
The control panel displays the prompt:
Attach media to takeup.
Press Proceed when media is ready to be loaded.
16. Press the Adv. to Takeup key to advance the media to the
takeup spool. You can press Stop if necessary to stop the
media advance at any time.
17. Grasp the middle of the media web, pull straight back, route
the media underneath the takeup core, and tape it to the
takeup core as shown in Fig. 3-6 on page 3-17.
If necessary, you can use the arrow keys on the control panel
screen to move the media forward or backward.
3-19
Advertisement
Table of Contents
