Manual Calibrations - Oce CS7075 User Manual

Manual Calibrations

4-8
When you run the calibrations from this menu, you evaluate the
calibration test patterns visually and enter the calibration values
via the control panel.
Note The manual BiDi and X head calibrations are time-
consuming and can be error-prone, but is necessary
when calibrating transparent media or other media
that the printer's digital image sensor cannot cali-
brate.
Before calibrating the printer, first clean the printhead jets. See
"Loading Roll-Fed Media" on page 3-14 for tips on detecting and
recovering missing jets.
1. Press the  (Menu) key from the Front Page screen on the
control panel to display the menus.
2. Press the  (Menu In) key display the Calibrate Printer
menu.
3. Press the  key to highlight Manual Calibrations.
4. Press the  (Menu In) key.
The Manual Calibration menu consists of these options:
◆ Media Feed (page 4-9) — eliminates banding between
print swaths ("stitch banding") by calibrating media
advance.
◆ Manual BiDi Registration (page 4-15) — the manual ver-
sion of AutoBiDi Calibration.
◆ Manual X Head Registration (page 4-12) — the manual
version of AutoH2H Calibration.
◆ Manual Jet Mapping (page 4-18) — the manual version
of AutoJet.
◆ Jet Status Lines (page 4-24) — prints a quick test pat-
tern that shows which jets are out.
◆ Default Registration Data (page 4-24) — sets all regis-
tration data to zero.
After calibration and jet mapping, perform a linearization or
color calibration (as supported by your print server or RIP).
Manual Calibrations