Oce CS7075 User Manual page 137

Recover Missing Ink Jets
14. If the Prime Bars show any missing jets, dab only the print-
heads that have missing jets with a lint-free cloth moistened
with Océ IJC700 UV Print Head Flush:
◆ Remove the parking station from the end of the printer.
◆ From the Front Page, press the Access Heads key.
◆ Gently dab the printhead with a blotting motion. Do not
wipe the printheads.
◆ Press the Access Heads key again to return the carraige
to the wiping station.
◆ Reinstall the parking station and retaining pin.
15. Print the Recover Jets Pattern for those printheads with miss-
ing jets (or select all printheads).
After printing this pattern, the prime bars are printed again.
◆ If all jets (indicated by a printed line) are working, the
printer is ready to print.
◆ If there are any missing jets, repeat steps 1 through 15
two or three times until all jets are working.
16. Print the Prime Bars.
◆ If all jets (indicated by a printed line) are working, the
printer is ready to print.
◆ If the Prime Bars still show missing jets, map them out
(see "Manual Jet Mapping" on page 4-18) or contact
Océ Display Graphics Systems Technical Services for fur-
ther instructions.
5-9