Table of Contents
Advertisement
Replace Ink Filters
The filter's label has an arrow that indicates the direction of
flow. Install the filter with the arrow pointing up.
7. Tighten the filter clamp.
The filter should be secure, but do not overtighten the
screw.
8. Connect the hoses to the top and bottom of the filter, and
tighten the connectors.
9. Reconnect the ink tube to the ink box.
See "Loading Ink" on page 3-11 for instructions.
10. Replace the ink box.
1 1. On the Front Page screen, press the (Menu) key to enter
the menu system.
12. Press the key repeatedly to highlight Maintenance.
13. Press the (Menu In) key display the Maintenance menu.
14. Press the key repeatedly to highlight Reset Reservoir
Filters.
If you are not replacing the entire set of filters, you can reset
the count for an individual filter.
15. Press the (Menu In) key.
5-17
Advertisement
Table of Contents
