Printing Tips - Oce CS7075 User Manual

Printing Tips

Printing Tips
◆ Printing without the takeup — cured output is dry to the
touch immediately, so roll-fed output can be allowed to col-
lect on the floor (for example, during unattended printing)
without using the takeup system, with no damage to the
output. Printing without the takeup also eliminates the possi-
bility of banding in output due to takeup tension effects.
◆ Curing continues for 24-48 hours — the UV ink will con-
tinue to cure for a day or two after printing. Maximum dura-
bility and adhesion is achieved after the ink is fully cured.
◆ Pausing printing — to pause printing, press the
key. While printing is paused, you can:
◆ Perform a Standard Purge of one or more colors, to
restore missing inkjets.
◆ Change media settings (vacuum, print delay).
◆ Pause-swap inks (see "Pause-Swapping Ink" on page 3-
13).

(Pause)
3-25