Oce CS7075 User Manual page 85

Loading Rigid Media
4. Enter the length of the media, then press the  key to
continue.
The control panel displays the prompt:
Load a sheet of media onto the printer.
5. Release the pinch rollers.
6. Slide a sheet of media onto the platen and into the pinch
rollers.
7. Install the media alignment bar onto the platen.
The pins on the media alignment bar engage corresponding
vacuum holes in the platen.
Fig. 3-13. Media alignment bar, installed
8. Slide the media forward until it is flush with the media align-
ment bar.
The media alignment bar is 0.25 inches (6.35 mm) high.
3-29