Workflow Overview; Daily Startup; Recover Jets Part 1 - Oce CS7075 User Manual

Workflow Overview

Daily Startup

Recover Jets Part 1

1-12
To daily ensure the functioning or substitution of all inkjets,
and optimal output quality, follow this procedure:
1. Wake the printer from Sleep mode.
2. Remove the left-side parking station from the printer.
3. Select "Access Printheads" from the Front Page screen of the
control panel.
The carriage moves to the left side, allowing access to the
printhead jetting orifices.
4. Moisten a lint-free cleaning cloth with Océ IJC700 UV Print
Head Flush solution.
5. Beginning with the #16 printhead, lightly dab (do not wipe)
the printhead orifice plate with the moistened cleaning cloth,
moving from the back of the printhead toward the front.
6. Repeat for each printhead, turning the cloth regularly and
remoistening with head flush as necessary.
7. When all printheads have been cleaned, return the carriage
to the right side of the printer by pressing the Proceed key on
the control panel.
The carriage moves back to its home position.
8. Reinstall the left-side parking station.
9. Print the Prime Bars.
◆ If all jets (indicated by a printed line) are working, the
printer is ready to print.
◆ If there are any missing jets, print the Prime Bars again
three or four times until all jets are working.
10. If any missing jets are present after printing the Prime Bars,
print a Recover Jets Pattern (Menu > Maintenance > Print
Recover Jets Pattern).
This is a special pattern designed to recover missing inkjets.
After printing this pattern, the prime bars are printed again.
◆ If all jets (indicated by a printed line) are working, the
printer is ready to print.
◆ If there are any missing jets, print the Recover Jets Pat-
tern one more time.
Workflow Overview