Oce CS7075 User Manual page 174

Description
(UV) UV Lamps
A-UV-1 Right UV Lamp Disabled
A-UV-2 Left UV Lamp Disabled
A-UV-3 UV Control Error
A-UV-4 UV Control Error
A-UV-6 UV Control Error
A-UV-7 UV Control Error
A-UV-10 UV Shield Up
W-UV-1 Right UV Lamp Needs
Replacing
W-UV-2 Left UV Lamp Needs
Replacing
B-14
Table B-1. Action and Warning Messages
Cause
The right UV lamp has been dis-
connected or has overheated.
The left UV lamp has been discon-
nected or has overheated.
The printer is unable to communi-
cate with the UV lamps' control
board.
The UV lamps' control board revi-
sion is unsupported.
The printer is unable to communi-
cate with the UV power supply.
The UV lamps' power supply revi-
sion is unsupported.
The UV shield on the front of the
carriage has been raised.
The right UV lamp is nearing its life
expectancy.
The left UV lamp is nearing its life
expectancy.
What to do
If the lamp is disconnected, power
down the printer and reconnect
the cable. If the lamp has not
been disconnected, allow the lamp
fan to run and wait for the lamp to
cool.
If the lamp is disconnected, power
down the printer and reconnect
the cable. If the lamp has not
been disconnected, allow the lamp
fan to run and wait for the lamp to
cool.
Check cable connections and
restart the printer. If the problem
continues, contact your Océ
Authorized Service Provider or Océ
Technical Support.
Contact your Authorized Service
Provider or Technical Support to
have it upgraded.
Ensure the power to the UV power
supply is turned on and that the
data cable is connected. If the
problem continues, contact your
Authorized Service Provider or
Technical Support.
Contact your Authorized Service
Provider or Technical Support to
have it upgraded.
Lower the shield to allow the UV
lamps to turn on and to allow
printing.
The right UV lamp should be
replaced to ensure optimal curing
performance.
The left UV lamp should be
replaced to ensure optimal curing
performance.
Diagnostics