Takeup Spool Pin Release - Oce CS7075 User Manual

Takeup Spool Pin Release

To quickly unspool a large amount of media from the takeup
without damaging the takeup tension spring, you must first dis-
engage the spool from the takeup system.
The spool is normally engaged to the takeup motor with a tab at
the end of the spool. To disengage this tab, press the Unload key
to detension the supply & takeup system, then insert the takeup
spool pin release tool between the spool and the bracket that
holds the spool. This allows the spool to spin independently
from the takeup as you pull media from it. When you are ready
to begin printing, remove the pin release tool and press the
Load key on the control panel.
Fig. 3-9. Takeup spool pin release tool
3-22 Unloading and Cutting Roll-Fed Media